Constitutional Emergency

NSA Whistleblower Destroys Obama’s Russia Narrative: “Inside Leak, Not Hacking”

http://www.libertyheadlines.com/nsa-whistleblower-destroys-obamas-r...

NSA Whistleblower Destroys Obama’s Russia Narrative: “Inside Leak, Not Hacking”



(ZeroHedge) — A group of retired senior intelligence officials, including the NSA whistleblower William Binney (former Technical Director, World Geopolitical & Military Analysis, NSA), have posted an open letter on consortiumnews.com that destroys the Obama administration’s “Russian hacking” narrative.

hacker photo

Photo by zodman

Within the letter, Binney argues that, thanks to the NSA’s “extensive domestic data-collection network,” any data removed remotely from Hillary Clinton or DNC servers would have passed over fiber networks and therefore would have been captured by the NSA who could have then analyzed packet data to determine the origination point and destination address of those packets.  As Binney further notes, the only way the leaks could have avoided NSA detection is if they were never passed over fiber networks but rather downloaded to a thumb drive by someone with internal access to servers.

We have gone through the various claims about hacking. For us, it is child’s play to dismiss them. The email disclosures in question are the result of a leak, not a hack. Here’s the difference between leaking and hacking:

Leak: When someone physically takes data out of an organization and gives it to some other person or organization, as Edward Snowden and Chelsea Manning did.

Hack: When someone in a remote location electronically penetrates operating systems, firewalls or any other cyber-protection system and then extracts data.

All signs point to leaking, not hacking. If hacking were involved, the National Security Agency would know it – and know both sender and recipient.

In short, since leaking requires physically removing data – on a thumb drive, for example – the only way such data can be copied and removed, with no electronic trace of what has left the server, is via a physical storage device…

Binney further notes that the manner in which the media’s “sources” are equivocating by using phrases like “our best guess” implies that the NSA has not been able to trace the Hillary or DNC “hacks” across fiber networks.  And, since the NSA tracks basically every packet that travels across U.S. networks, Binney concludes that it’s effectively impossible that the WikiLeaks data came from a “hack.”…

Views: 437

Reply to This

Replies to This Discussion

How are the Presidential Electors elected and what are the qualifications?;
Plus what are the rules for Electors?;
Qualifications; They must be a member of the Party for which they are being chosen, Must NOT be a member of any US Senate or House seat or any other Federal office.  The complete rules are in the link below.
Rules for Electors once they have been elected:
Unfortunately there are not many Federal rules that I can find. Basically the are supposed to vote for the candidate of which ever Party they have been elected to represent. They have each signed a document of Commitment to vote for their Parties candidate according to the State numbers allocated to that State.

Some States have penalties and fines but not all of them.

https://www.archives.gov/federal-register/electoral-college/elector...

This next link leads to a PDF file that has details on the rules.

https://www.archives.gov/global-pages/exit.html?link=http://www.nas...

RSS

About

Old Rooster created this Ning Network.

This effort is focused on sacrifice to protect and defend the Constitution of the United States against all enemies foreign and domestic.

Fox News

Tech Notes

Thousands of Deadly Islamic Terror Attacks Since 9/11



HOW TO JOIN YOUR STATE GROUP

1. Click on State Groups tab at the top of the page.
2. Find your State Flag
3. Click on Flag.
4. Look for link to join Your State Group near the top of the State Groups page.
5. Click on it.

Follow the Prompts


How to post "live" URL in posts at PFA............. Adding URLs in blog posts that are not "live" is a waste of everyone's time.....
Here's how....if anyone has better guidance send to me.....
First........type your text entry into the post block to include typing or paste the URL you want us to view........when finished with the text, highlight and copy the URL in the text.......then click the "add hyperlink" tool in the B, I, U box just above the text entry, after clicking, a window will open asking for the URL...paste the URL in the box and click "OK". You have now made the URL "live"...........it shows some code before the post is published, it goes away when you "publish post".......

Events

© 2019   Created by Old Rooster.   Powered by

Badges  |  Report an Issue  |  Terms of Service